Durolux
Water-based modified acrylic, anti-algal, high-performance premium exterior wall finish designed for long-lasting exterior performance in tropical Indian conditions.

Water-based modified acrylic, anti-algal, high-performance premium exterior wall finish designed for long-lasting exterior performance in tropical Indian conditions.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Paints Durolux Premium Exterior Emulsion is a water-based modified acrylic, anti-algal, high-performance exterior wall finish. Key product benefits include long-lasting exterior performance even in extreme tropical conditions of India, advanced anti-algal chemistry, resistance against algae and fungi growth, and very good dirt pick-up resistance and dirt-cleaning properties.
Follow the product-specific application guidance below and use the method shown for the product.
Good surface preparation is essential for a consistent finish. Follow these product-specific preparation points before applying the coating.
Ensure plaster is completely dry and thoroughly clean, free from dust, flakes and grease.
Treat old algae growth as directed and repair leakages or seepage before painting.
Remove loosely adhering, powdery or defective paint by brushing, scraping or water jetting where required.
Application of any kind of putty is not recommended; use a 1:3 mixture of white cement and fine sand for surface imperfections.
Ensure plaster is completely dry and clean.
For old algae-affected surfaces, thoroughly clean and treat as directed and repair water leakages/seepage.
Application of putty is not recommended; surface imperfections may be addressed with a 1:3 white-cement/fine-sand mixture as described.
Scrub the surface with sandpaper or wire brush.
Apply two coats of Durocoat exterior water-based cement primer.
Apply 2–3 coats of Durolux, thinning with 400 ml water, with 4–6 hours between coats.
Brush, roll or spray.
Wash and clean algal/fungal growth at regular six-month intervals for best performance.
For best performance, wash and clean algal and fungal growth at regular intervals of six months.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.