Duro Outex
Exterior sheath emulsion with a smooth matt finish and protective technology intended to guard walls against household and environmental fungal growth.

Exterior sheath emulsion with a smooth matt finish and protective technology intended to guard walls against household and environmental fungal growth.
Explore the product story, application guidance and technical information in a clear, responsive format.
Duro Outex Exterior Sheath Emulsion is presented as a smooth matt finish with Guard technology intended to guard walls against household threats, with a long-lasting film and protection against unwanted fungus growth.
Follow the product-specific application guidance below and use the method shown for the product.
Scrub with sandpaper or wire brush to remove loose particles, peeling paint, fungus and grease.
Apply two coats of Durocoat exterior water-based cement primer.
Apply 2–3 coats of Duro Outex, thinning with 400 ml water.
Keep 4–6 hours between coats.
Apply by brush, roller or spray.
For best performance, wash and clean algae and fungal growth at regular six-month intervals.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.