DuroTrac
Premium Interior

DuroTrac

Interior wall finish for smooth plasters, false ceilings, asbestos sheets and concrete, with the product directions describing a premium interior emulsion system.

Range Premium InteriorApplication Brush · Roll · SprayColour Tailor-made matching available
Product information

Product information, clearly presented.

Explore the product story, application guidance and technical information in a clear, responsive format.

GALAXY COLORSPremium Interior Emulsion
Product story

Product information for DuroTrac

Galaxy Paints DuroTrac Interior Emulsion is an interior wall finish that can be applied on smooth plasters, false ceilings, asbestos sheets and concrete.

Product at a glance

Where it fits & how it is applied

⌂

Applications & surfaces

Interior wallsSmooth plastersFalse ceilingsAsbestos sheetsConcrete
✓

Application methods

BrushRollSpray
Application at a glance

Designed around the way you apply.

Follow the product-specific application guidance below and use the method shown for the product.

BrushRollSpray
Features & benefits

Why choose DuroTrac?

Interior wall finish
Suitable for smooth plasters, false ceilings, asbestos sheets and concrete
Water-based emulsion
Matt finish with slight sheen
Where to use

Applications & suitable surfaces

  • Interior walls
  • Smooth plasters
  • False ceilings
  • Asbestos sheets
  • Concrete
Directions for use

Application guide

1

Scrub with sandpaper or wire brush to remove loose particles, peeling paint, fungus and grease.

2

Fill dents with Durocoat putty where necessary and apply another coat over puttied areas.

3

For newly plastered surfaces, Durocoat Interior Water-Based Cement Primer is recommended.

4

Apply 2–3 coats of Durotrac Interior Emulsion, thinning with 400 ml water, with 4–6 hours between coats.

5

Brush, roll or spray.

6

For repainting, apply 2 coats; for fresh surfaces, apply 3 coats.

↗
Post-application instructions

Keep the finish performing well

For repainting, apply 2 coats; for fresh surface painting, apply 3 coats as specified in the product directions.

Technical data

At-a-glance specifications

Coverage
1 coat: 25–28 sq m; 2 coats: 13–15 sq m
Flash point
Water-based paint; not flammable
Gloss / sheen
0–4 glass plate at 60° (matt finish with slight sheen)
Shelf life
3 years from manufacture in original tightly closed containers away from direct sunlight and excessive heat
Stability of thinned paint
Use within 24 hours
Surface dry time
10–15 minutes

Actual coverage may vary depending on application method, surface condition and surface roughness.

!
Safety, health & environment

Precautions & responsible use

✓

Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.

✓

Do not over-thin or overextend the brush.

✓

Do not use stainers or other colourants unless the product directions specifically permit them.

✓

Keep the container tightly closed and out of reach of children.

✓

Wear suitable gloves and avoid contact with skin or eyes.

✓

Use only in well-ventilated areas and store in a cool, dry place.

Have a project in mind?

Let’s discuss your requirement.

Share the product you are considering, your application and your colour requirement with the Galaxy Colors team.

Need a specific shade?

Tell us what you need.

Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.

GALAXY COLORS · ENQUIRY

Tell us about your requirement

Share a few details and we will prepare a clear enquiry email for our Customer Care team.

Your email app will open with a ready-to-send enquiry addressed to customercare@galaxycolorsindia.com.