Duro Shield
High-performance exterior emulsion formulated to safeguard exteriors from extreme weather conditions, with high sheen and advanced anti-algal protection.

High-performance exterior emulsion formulated to safeguard exteriors from extreme weather conditions, with high sheen and advanced anti-algal protection.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Paints Duro Shield Exterior Emulsion is a high-performance exterior emulsion specially formulated to safeguard exteriors from extreme weather conditions. Key product benefits include high sheen, advanced anti-algal bio-pack and a 7-year performance warranty covering fading, flaking, peeling, algal growth and fungal performance, subject to the product and warranty guide.
A 7-year performance warranty is provided covering fading, flaking, peeling, algal growth and fungal performance; it directs users to the Duro Shield product and warranty guide for full details.
Follow the product-specific application guidance below and use the method shown for the product.
Good surface preparation is essential for a consistent finish. Follow these product-specific preparation points before applying the coating.
Ensure plaster is completely dry and thoroughly clean, free from dust, flakes and grease.
Treat old algae growth as directed and repair all water leakages or seepage.
Remove loose, powdery or defective paint by brushing, scraping or water jetting where required.
Fill holes, dents and fine cracks with Wall Putty or a 1:3 mixture of white cement and fine sand.
Ensure plaster is completely dry and free from dust, flakes and grease.
Clean and treat old algae growth as directed.
Repair water leakages/seepage before painting.
Remove loose or defective paint by brushing, scraping and water jetting where required.
Fill holes, dents and fine cracks with Wall Putty or a 1:3 white-cement/fine-sand mixture.
Apply two coats of Durocoat exterior water-based cement primer.
Apply 2–3 coats of Duroshield, thinning with 400 ml water, with 4–6 hours between coats.
Brush, roll or spray.
Clean algal and fungal growth at regular six-month intervals for best performance.
For best performance, wash and clean algal and fungal growth at regular intervals of six months.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.