Duroplus
Water-based interior emulsion for dry to moderately humid climate conditions, designed as a durable wall finish with cleaner shades and good anti-algal performance.

Water-based interior emulsion for dry to moderately humid climate conditions, designed as a durable wall finish with cleaner shades and good anti-algal performance.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Paints Duro Plus Interior Emulsion is a water-based interior wall finish suitable for dry to moderately humid climate conditions. The product offers resistance to chalking, cracking and weathering, cleaner shades and good anti-algal performance in dry to moderately humid conditions.
Duro Plus is a water-based interior wall finish for dry to moderately humid conditions, with resistance to chalking, cracking and weathering, cleaner shades and good anti-algal performance.
Follow the product-specific application guidance below and use the method shown for the product.
Good surface preparation is essential for a consistent finish. Follow these product-specific preparation points before applying the coating.
Ensure plaster is completely dry and thoroughly clean, free from dust, flakes and grease.
Treat old algae growth as directed and repair water leakages or seepage.
Remove loose, powdery or defective paint by brushing, scraping or water jetting where required.
Fill holes, dents and fine cracks with Wall Putty or a 1:3 mixture of white cement and fine sand.
Ensure plaster is completely dry and clean.
Treat algae growth on old surfaces as directed and repair leakages/seepage.
Fill holes, dents and fine cracks with Wall Putty or a 1:3 white-cement/fine-sand mixture.
Scrub with sandpaper or wire brush.
Apply two coats of Durocoat Interior Water-Based Cement Primer.
Apply 2–3 coats of Duroplus, thinning with 400 ml water, keeping 4–6 hours between coats.
Brush, roll or spray.
For best performance, clean algal and fungal growth at regular six-month intervals.
For best performance, wash and clean algal and fungal growth at regular intervals of six months.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.