Durograce
Water-based exterior/interior wall finish for dry to moderately humid climate conditions, with resistance to chalking, cracking and weathering.

Water-based exterior/interior wall finish for dry to moderately humid climate conditions, with resistance to chalking, cracking and weathering.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Paints Durograce Exterior Emulsion is a water-based exterior/interior wall finish suitable for dry to moderately humid climate conditions. Key product benefits include resistance to chalking, cracking and weathering, cleaner shades that last longer and good anti-algal performance in dry to moderately humid conditions.
Follow the product-specific application guidance below and use the method shown for the product.
Good surface preparation is essential for a consistent finish. Follow these product-specific preparation points before applying the coating.
Ensure plaster is completely dry and thoroughly clean, free from dust, flakes and grease.
For old surfaces with algae growth, clean and treat the surface; the product directions specify bleaching powder treatment followed by washing and drying.
Repair all water leakages or seepage before painting.
Remove loosely adhering particles, powdery material and defective paint by brushing, scraping or water jetting where required.
Fill holes, dents and fine cracks with Galaxy Paints Wall Grace Wall Putty or a 1:3 mixture of white cement and fine sand.
Ensure plaster is completely dry and free from dust, flakes and grease.
For algae growth, thoroughly clean and treat the surface; the product directions specify household bleaching powder treatment for old algae-affected surfaces.
Repair water leakages and seepage before painting.
Remove loose or defective paint by brushing, scraping or water jetting where required.
Fill holes, dents and fine cracks with Galaxy Paints Wall Grace Wall Putty or a 1:3 white-cement/fine-sand mixture.
Apply two coats of Durocoat exterior water-based cement primer.
Apply 2–3 coats of Durograce, thinning with 400 ml water, with 4–6 hours between coats.
Brush, roll or spray.
For best performance, wash and clean algal and fungal growth at six-month intervals.
For best performance, wash and clean algal and fungal growth at regular intervals of six months.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.