Duro PU Enamel
Alkyd-based enamel described for metal maintenance applications, offering anti-rust protection, quick drying and high gloss.

Alkyd-based enamel described for metal maintenance applications, offering anti-rust protection, quick drying and high gloss.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Colors Duro PU Enamel is designed as an alkyd-based coating for metal maintenance applications, with anti-rust, quick-drying and high-gloss benefits.
Product information describes Duro PU Enamel as an alkyd-based coating for metal maintenance applications and lists anti-rust, quick drying and high gloss as benefits.
Follow the product-specific application guidance below and use the method shown for the product.
Wipe the surface clean of loose particles, dust, grease, dirt and rust.
Sand with abrasive paper grit No. 180.
Wipe clean and use an appropriate primer.
Fill dents and imperfections with suitable fillers, then sand and prime again.
Thin 1 litre with 150 ml of good quality turpentine for brushing consistency.
Apply two coats, allowing 4–6 hours between coats.
Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.
Do not over-thin or overextend the brush.
Do not use stainers or other colourants unless the product directions specifically permit them.
Keep the container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.