Duro Green
Water-based, medium-gloss enamel with high stain resistance and non-yellowing properties.

Water-based, medium-gloss enamel with high stain resistance and non-yellowing properties.
Explore the product story, application guidance and technical information in a clear, responsive format.
Galaxy Colors Duro Green enamel is a water-based, medium-gloss coating with high stain resistance and non-yellowing properties, helping surfaces look fresh-as-new for a long time. It is suitable for wood, metal and wall surfaces and is positioned as a convenient alternative to traditional oil-based enamels.
Product information describes Duro Green as a water-based, medium-gloss enamel with high stain resistance and non-yellowing properties and as an alternative to traditional oil-based enamels.
Follow the product-specific application guidance below and use the method shown for the product.
Clean and prepare all surfaces. Remove loose paint and wash dirt and grease with detergent; rinse and dry.
Remove mildew stains with a mildew-stain-removing product.
Scuff-sand glossy surfaces and repair imperfections.
Remove dust with a damp cloth and allow to dry.
For metal, apply Durocoat Zinc Primer or Metal Primer.
For wood, sand and prime with an acrylic wood primer.
For masonry, apply two coats of Durocoat Universal Cement Primer followed by two coats of Duro Green.
Duro Green can be thinned with 250 ml of water per litre; thinned paint should be used within 24 hours.
Actual coverage may vary depending on application method, surface condition and surface roughness.
Keep container tightly closed and out of reach of children.
Wear suitable gloves and avoid contact with skin or eyes.
Use only in well-ventilated areas and store in a cool, dry place.
Galaxy Colors products can be matched to your colour requirement. Share your requirement with our team and we can take it forward.
Share a few details and we will prepare a clear enquiry email for our Customer Care team.